The Acebeam X10 is a high-performance rechargeable ultra-compact searching flashlight that combines spot and flood light.
With 9 x SAMSUNG LH351D LEDs (CRI≥90) for the close range and 1 x CREE XHP35 HI LED for the far range to emit max. 7,000 lumens brightness and a range of up to 469 meters beam-shot. The 9 x SAMSUNG LH351D LEDs (CRI≥90) resembles the nature of sunlight that displays an object's more natural-looking colour.
Powered by 1 x 21700 USB-C rechargeable battery, the X10 is a compact and handy, tactical EDC-LED flashlight with a decent range and additional light for the close range. Catering for numerous outdoor and extreme environments, this light is a indispensable helper in cave exploring, searching and rescuing, as well as to act as a backup light for drivers.
FULL DESCRIPTION PRODUCT TAGS PRODUCT SPECIFICATIONS Features: ALL-ON (9xSAMSUNG LH351D LEDs (CRI≥90) +1xCREE XHP35 HI LED): Turbo: 7000 lumens; 1h; 469m; 54990cd High: 1800 lumens; 1h 15min; 240m; 14400cd Mid: 800 lumens; 2h 15min; 181m; 8190cd Low: 350 lumens; 4h; 137m; 4692cd Ultra-Low: 7 lumens; 20h; ROUND-ON (9xSAMSUNG LH351D LEDs (CRI≥90)): Turbo: 4400 lumens; 1h; 236m; 13924cd High: 1000 lumens; 2h; 167m; 6972cd Mid: 420 lumens; 4h 30min; 89m; 1980cd Low: 200 lumens; 9h Ultra-Low: 5 lumens; 55h CENTER-ON (1xCREE XHP35 HI LED): Turbo: 2200 lumens; 1h; 407m; 41412cd High: 650 lumens; 2h 30min; 214m; 11449cd Mid: 300 lumens; 4h 45min; 167m; 6972cd Low: 150 lumens; 8h 15min; 130m; 4225cd Ultra-Low: 2 lumens; 22h Equipped with 9xSAMSUNG LH351D LEDs (CRI≥90) plus 1xCREE XHP35 HI LED with a lifespan of 50,000 hours Maximum output of 7,000 lumens; maximum beam distance up to 469 meters Featuring spotlight and floodlight for various lighting needs 9xSAMSUNG LH351D LEDs (CRI≥90) for high colour rendering High efficiency circuit board (without PMW) 3 different lighting modes (All-ON, Round-ON, Center-ON) can be toggled Powered by 1x 21700 USB-C 30A rechargeable Li-ion battery (Included) The Included 21700 battery can be recharged through a built-in USB-C port Dual switches (Tail switch and Side switch) for easy and fast operation Lockout to prevent accidental activation Strobe setting that can disorient an attacker or serve as a distress signal All circuitry contact points are gold-plated, providing better conductivity and superior durability Built-in intelligent temperature controller is used and adjusted brightness according to work status and temperature Power indication reminds the battery status Stainless steel strike bezel design for use in emergency situations Anti-slip knurling provides a better grip Toughened ultra-clear glass lens with anti-reflective coating Integrated Precision Digital Optics Technology reflector plus Clear TIR Optics Lens provide extreme performance Premium type Ⅲ anodised anti-abrasive finish Size: 141mm(length)x 60mm(head diameter)x 25.4mm(tube diameter) Weight: 207g(7.3oz.) w/o battery; 280g(9.88oz.) w/ battery Single button switch for controlling brightness Constructed from Aero grade Aluminium Alloy Over-heat protection to avoid high-temperature of the surface Impact resistance: 1 meter Waterproof: IP68 (5 meters submersible) Battery Indicator: Green light constant-on, Battery Voltage＞3.2V Red light constant-on, Battery Voltage is between 3.2V~3V Red light flashes, Battery Voltage＜3V （Please charge or change the battery) Warning 1. X10 is a high intensity lighting device and is capable of causing eye damage. Avoid shining the light directly into the eyes to humans or animals. 2. The X10 must be installed with 1 x 21700 high drain batteries that can produce at least 30 Amps of current. 3. Recommend using ACEBEAM branded 21700 4000mAh 30A battery. 4. The X10 is high power lighting tool by driving high current. Please monitor the heat of the light with your bare hands during Turbo Mode. If the light becomes too hot to hold at the hottest area then you must turn down lower mode of brightness or OFF for the light to cool down. The hottest area is usually around the side switch of the light. 5. Unauthorised disassembly may damage the flashlight and void the warranty. 6. It is normal if the surface heat is increased during use due to the excellent thermal conductivity technology. It is suggested to use in a well ventilated area with ambient temperature. 7. Caution hot when using continuously for a long time. Do not put it on flammable materials for a long time, any fire or any safety problems caused by this will not be related to the manufacturer and distributors. 8. Please check and replace the O-ring regularly to maintain the waterproof rating. 9. Please check and lubricate the threads regularly with professional lubricant. 10. Clean the contact surfaces regularly to keep the flashlight normal operation. If irregular strobe or failure to turn-on occurs, the contact surfaces may be dirty and requires cleaning by using alcohol cotton swabs. 11. Remove the battery from the flashlight during long term storage. 12. This flashlight is not intended to be used as a diving light. 13. Do not aim the flashlight directly at eyes. Users must be over 18 years of age. Keep out of the reach of children.